SLIMDUCT MD Index
| update | : | 2011-06-16 |
Stylishly designed, SLIMDUCTTM MD series will compliment any interior or exterior design scheme
Features
- Innovation
Discreet Interior Design- Neutral Colors
Blend in well with the overall color scheme of the interior, or exterior, of any building.
MD-751 
Ivory MD-751 
Neo White MD-851 
Neo White - Optional Gasket for joint between MD duct and indoor unit
Rubber Gasket MG is used to enhance the appearance of the joint between the indoor unit and the SLIMDUCT MD.
•RUBBER GASKET •Finished appearance 
* This fitting may not be suitable for use with certain models of ﹛indoor units. - No Visible Screws
The appearance of the duct and fittings is enhanced because there are no visible screwheads.
•Cap for screw 
SLIMDUCT SD SLIMDUCT MD 
Finished appearance
- Neutral Colors
- Function
Excellent Performance- Flame Retardant
SLIMDUCT MD conforms to the requirements of UL-94-V-0.* * Excludes some items.
In house testing based on UL-94-V-0.
- Flame Retardant
- Brilliant
Complete Versatility to Suit Any Indoor Environment- Accommodates larger diameter insulated drain hose required for interior installations
SLIMDUCT MD is designed for ease of application as well as to facilitate the use of insulated drain hose which is used more frequently (by a factor of 300%) in indoor applications.
- Large Range of Fittings
14 different fittings enable SLIMDUCT MD to easily be customized to suit a wide variation of interior wall finishes and configurations.
- Accommodates larger diameter insulated drain hose required for interior installations
Typical Detail of Indoor Installation (MD-751)
| A | SLIMDUCT MD | MD |
| B | WALL INLET | MW |
| C | 90° FLAT ELl | MK |
| D | 90° INSIDE VERTICAL ELL | MCI |
| E | 90° OUTSIDE VERTICAL ELl | MCO |
| F | FLEXIBLE ELL | MF |
| G | RUBBER GASKET | MG |
| H | ADJUSTABLE 90㏑ VERTICAL ELL | MCS |
Wall penetration is located below indoor unit at left when facing unit.
|
 |
| Typical Installation |
Typical Soffit Installation
| More than 130mm from Soffit | 75 to 130mm from Soffit | Less than 75mm from Soffit |
 |
 |
 |
Specification
Specification
| Temperature Range | -20℃ to 60℃ | |
| Application | Wall Mounted | |
| Material | Rigid Polyvinyl Chloride (UV Stabilized and Fire Resistant) | |
| Color | MD-751 | Ivory (Silky White)* Neo White |
| MD-851 | Neo White | |
| * | Excludes some items |
The table below shows the maximum size lineset combinations that can be contained in SLIMDUCT MD :
| Item No. | Insulation Thickness 10*10mm |
| MD-751 | 6.35*9.52 to 6.35*12.70 + DSH-14 |
| MD-851 | Ventilation hose (O.D. less thanØ37) + 6.35*9.52 to 6.35*12.70 + DSH-14 or 6.35*9.52 to 9.52*15.88 + DSH-14 |
Caution
- SLIMDUCT MD duct and fittings are suitable for use and storage within a temperature range of -20℃ to 60℃.Deformation may occur at temperatures exceeding 60℃.
- When attaching SLIMDUCT MD to wall, USE ONLY PAN HEAD SCREWS. DO NOT USE FLAT HEAD OR COUNTERSUNK SCREWS AS THEY CAN EXERT TOO MUCH PRESSURE AND CRACK THE PVC MATERIAL.
- Use of impact screwdrivers to attach SLIMDUCT MD to wall and to tighten fixing screws is highly discouraged as they can easily overtighten the screws and crack the PVC material. Use hand screwdrivers for precise torque control.
- Use SL-300 STRAP KIT to retain lineset inside duct.
- SLIMDUCT MD IS NOT WATERPROOF. For external use, seal all longtitudinal and lateral seams, screw heads and wall penetrations with weatherproof sealant or putty.
Lineup
| Item No. | Product name/type |
| MD | SLIMDUCT MD (Ducting) |
| MW | WALL INLET |
| MWM | WALL INLET for A/C Cap |
| MWS | EXTENDABLE WALL INLET |
| MK | 90° FLAT ELL |
| MKF | 45° FLAT ELl |
| MCI | 90° INSIDE VERTICAL ELL |
| MCO | 90° OUTSIDE VERTICAL ELL |
| MCS | ADJUSTABLE 90° VERTICAL ELL |
| MN | 90° SHAPE CHANGE ELBOW |
| MJ | COUPLER |
| MF | FLEXIBLE ELL |
| MFJ | FLEXIBLE ADAPTOR |
| MP | SOFFIT INLET |
| MG | RUBBER GASKET |
Products
