|
Products
» AC Accessories » JT
Insulation Material Joint Tape "JTS"
| Code No. |
Product No. |
Length |
Width |
Thickness |
Color |
Pcs/Pkg |
| C07392 |
JTS-75-I |
5m |
75mm |
0.6mm |
Ivory |
12 |
Features
| ・ |
Easy connection by winding at connection part of insulating material. |
| ・ |
Heat-Resistant Temperature : -20°C to +80°C |
| ・ |
Superior on tensile strength due to reinforced filament combined inside.(JT-75) |
| ・ |
Easy cutting by a cutter. |
| ・ |
Ivory color to be united with insulating material. |
|
|
Specification
| Material |
Special Synthetic Rubber |
Remarks
| ・ |
At the connection of insulating materials for refrigeration, please make sure to do caulking or to inject urethane, etc.
not to break out a crevice. |
| ・ |
Outer surface of tapes stick each other. Please pay attention not to touch tape and tape each other. |
| ・ |
Please keep inside paper pipe vertically for storage. |
| ・ |
After winding tape, please push tape to get enough to fit onto insulating material because there would be dew formation occurred if there is a crevice between tape and insulating material. |
| ・ |
Please put gloves on if an operator is allergic to rubber. |
| ・ |
Please keep inside paper pipe vertically in good condition for storage - avoiding direct sunshine and wind/rain. |
|
|
How to use.
| 1. |
Cut JT-75-I tape at suitable length according to the pipe dimensions. |
| 2. |
After removing rubbish/dust on surface, put insulating materials firmly together. |
|
*Setting the connection part of insulating materials at the center of tape, please wind the tape stripping paper off.
Black color side is adhesive surface.
 |
| 3. |
At the connection of insulating materials for refrigeration, please make sure to do caulking or to inject urethane, etc. not to break out a crevice.
 |
|
|
DHF/JT/HF/HV/HN/HY/VT
Products
» AC Accessories » JT
|
