HEAT-INSULATED DRAIN HOSE "DSH" (Soft Type)

00	:	Index	11	：	DSH	:	Heat-Insulated Drain Hose
01	:	Features	12	：	DSH-S	:	Heat-Insulated Drain Hose Set
			13	：	DSH-14C	:	Connection Joint to Indoor Unit
			14	：	DSH-14V	:	Connection Joint to VP-Pipe
			15	：	DSH-14J	:	Extension Joint for Drain Hose
			16	：	DSH-14H	:	Joint for Drain Hose
			17	：	DSH-20/25NC	:	Connection Joint to Air-Con.Unit & VP-Pipe
			18	：	DSH-20/25NV	:	Connection Joint to VP-Pipe
			19	：	DSH-20/25NJ	:	Extension Joint for Drain Hose

NOTE for Installation
[1]	Cut Drain Hose surely at a right angle and remove rubbish, oil and dust completely from the adhesion surface.
[2]	Use adhesive agent for VP pipe and insert firmly to the bottom of joint parts. (Connecting method shall conform to an instruction manual attached to an adhesive agent. Insufficient insertion and bending work before dry of adhesive cause water leakage.)
[3]	Minimum bending R for Drain Hose shall be more than 3 times of its outer diameter.
[4]	Do not to slack Drain Hose at installation.(Please install Drain Hose with enough incline for smooth water-flow.)
[5]	Please use Drain Hose and the accessories under the environment where the surface temperature shall be in the range of -20ｰC to 60ｰC.